Aviom AV-P2 Guide de l'utilisateur télécharger pdf (Page 20)

12Av-P2 Ou t P u t MO d u l e us e r Gu i d e

Mounting the AV-P2

The AV‑P2 module is designed to be mounted to any flat surface. Optionally,

it can be rack mounted using a standard 19‑inch rack shelf. Two AV‑P2 units

can fit on a single rack shelf.

The mounting flanges on each side of the device are designed to support

the weight of the AV‑P2 without additional hardware. The mounting flanges

can be reversed easily using only a Phillips head screwdriver. Each mounting

flange contains holes for two screws per side. Always support the unit with

all four screws when attaching the product to a flat surface.

If desired, the mounting flanges can be turned around so that they mount

under the AV‑P2, making the profile of the AV‑P2 as small as possible. Always

use all the mounting screws when reversing the flanges on the AV‑P2.

Always allow adequate ventilation for devices mounted in equipment racks.

Avoid placing your AV‑P2 directly above or below other rack‑mounted

devices that produce high levels of heat, such as power amps.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 38 39

Pas de commentaire

Aviom AV-P2 Guide de l'utilisateur Page 20